Announcement

Collapse
No announcement yet.

LG 50PJ350 Y sustain Board HELP!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    LG 50PJ350 Y sustain Board HELP!!

    I found this LG T.V on the side of the road with a free sign and could not help myself, the back was already off and most boards looked great but then I got to the Y sustain board and there was a couple CAPS ripped off and need help to find out what V and UF sizes were they?
    Attached Files

    #2
    Re: LG 50PJ350 Y sustain Board HELP!!

    Ordered a New board, hopefully will see if it works.

    Comment


      #3
      Re: LG 50PJ350 Y sustain Board HELP!!

      what's the chances of someone else missing the same caps asking the same question in BADCAPS, slim, very slim, or incredibly have?

      A search using the part number of the PCB yielded this.

      https://www.badcaps.net/forum/showth...ht=EBR63039801

      3300uf 10v, 1000uf 25v
      Attached Files

      Comment


        #4
        Re: LG 50PJ350 Y sustain Board HELP!!

        Originally posted by Miner928 View Post
        Ordered a New board, hopefully will see if it works.
        better check for shorted buffer boards before install,and bad ZSUS. search the model and you should find a post with the service manual which is not too bad for a lot of checks that can be done.

        Comment


          #5
          Re: LG 50PJ350 Y sustain Board HELP!!

          I have one of these that blew out the Y sustain board twice. Can someone please tell me where to measure on the buffer/driver boards to tell if they're shorted? Thanks

          Comment

          Working...
          X