GPU Gigabyte gtx 1080 mini shorted diode

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ss45
    Senior Member
    • Jun 2019
    • 119
    • Brazil
    #1

    GPU Gigabyte gtx 1080 mini shorted diode

    hi folks. i have gpu with shorted here. sorry if i posted i the wrong sub..

    d33 was shorted and has been removed. if anybody has one at hand and has the free time, would it be too much trouble to take measurement of the diode. of course i can make makeshift diode using 2 discrete diodes, but i cant figure out which direction cathode and anode. searching online with sot 23 diode as keyword giving several different pinouts. i am afraid trying each possibilities one by one might damage the card further....

    so if anyone willing to help, i would be grateful
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Document Archive
      Thermal pad thickness for various laptop GPU / Graphics Cards
      by Document Archive
      Thermal pad thickness for various laptop GPU / Graphics Cards

      ASUS Dual RTX 2070 OC 8GB
      ASUS ROG STRIX RTX 3080 OC
      ASUS ROG STRIX RTX 3090
      ASUS TUF Gaming RTX 3080 OC Edition
      ASUS TUF GTX 1660 S-O6G GAMING
      EVGA RTX 3060 Ti XC GAMING 8GB
      EVGA RTX 3060 XC GAMING 12GB GDDR6
      EVGA RTX 3080 FTW3 ULTRA GAMING
      EVGA RTX 3080 TI FTW3 ULTRA GAMING
      EVGA RTX 3090 XC3 ULTRA GAMING 24GB
      Gainward RTX 2080 Phoenix GS Specs
      Gainward RTX 3070 Phoenix 8GB
      Gainward RTX 3080 Ti Phoenix
      GIGABYTE AORUS RTX 3080 MASTER 10G
      ...
      GPU - GPU - Thermal pad thicknesses for laptop video cards - schematic download
      https://www.badcaps.net
      02-09-2024, 08:08 AM
    • repairboi31
      Need your help i am a student who has shorted Gigabyte Aorus 15P-KD laptop
      by repairboi31
      Hi everyone, i am a student i'm looking for your advice on my laptop.

      Gigabyte Aorus 15P-KD (11th gen intel)
      Motherboard: GA-RX5LKD REV 1.2
      Model Number: RX5L
      11800H SRT3
      RTX 3060 6GB
      HM570 SRKMA

      I showed my computer to 3 notebook technician and gigabyte service.

      Gigabyte service doesn't find any way to fix it. They never had schematics for this laptop because they never had any document agreements with gigabyte company.

      1st technician said CHIPSET is hot we need to replace. I bought the chipset but...
      03-01-2023, 05:03 AM
    • foshland
      Gigabyte 970 Mini IFP_IOVDD (backdrive prevention) Shorted to GND
      by foshland
      Hi to all, I have a 970 mini that has Q503 leg 2 (IFP_IOVDD (backdrive prevention)) shorted to ground, If I inject 2 volts, only GPU heats a little (2 Amp draw), can I assume its a dead GPU?? or should look somewhere else? It came with some capacitors and resistors burnt from the analog part of the DVI (VGA output) and they are open, not shorted.

      If I connect it to the PC, it heats reaching 60 degrees with no heatsink in 30 seconds, It isnt recogniced by the PC, so doesnt have meassured another voltages. Mosfets looks good and visual inspection is OK.

      Attached schematics,...
      12-07-2021, 10:23 PM
    • Askic
      TVS diode shorted on HP motherboard
      by Askic
      Hello guys,
      I have seen a few videos on youtube about repiring HP 15 pavilion laptops that has TVS (Transient Voltage Suppressor) diode shorted to the ground.
      Please have a look at the attached picture.
      The diode is P4SMAJ20A and according to the datasheet its breakdown voltage (at 1 mA is 22.2V or 24.6V at10 mA).
      THis means that if voltage goes higher that 23V this diode will start conducting and short to ground thus protecting rest of the circuits from overvoltage.

      What I don't understand if is this diode reversible, for example if voltage goes below 20...
      12-30-2020, 11:56 AM
    • Donny2derby
      Help identifying shorted diode.
      by Donny2derby
      Hi there all.

      Troubleshooting an SMPS and I’ve found a SMD diode shorted in both directions. The trouble is it has no identification on it. So what do I replace it with and how do I tell where the anode and cathode is and how to mount the replacement?

      It is diode D1 on the image.

      Regards.

      Gareth....
      1 Photo
      03-07-2024, 08:10 PM
    • Loading...
    • No more items.
    Working...