![]() |
|
|
Thread Tools | Display Modes |
![]() |
#41 | |
New Member
Join Date: Feb 2021
City & State: aquitaine
My Country: france
I'm a: Knowledge Seeker
Posts: 3
|
![]() Quote:
Yesterday i order lot of components (opto cap) i will change it step by step ! |
|
![]() |
![]() |
![]() |
#42 |
Super Moderator
Join Date: Jul 2005
City & State: ----
My Country: Sweden
Line Voltage: 230v 50Hz
I'm a: Knowledge Seeker
Posts: 4,698
|
![]() Ok, you can always connect via serial, see post #12.
__________________
"The one who says it cannot be done should never interrupt the one who is doing it." |
![]() |
![]() |
![]() |
#43 |
New Member
Join Date: Feb 2021
City & State: aquitaine
My Country: france
I'm a: Knowledge Seeker
Posts: 3
|
![]() Hello, I have good news on my model I replaced the caps and the IO12 optocoupler a TLP621 (he had a little brother, which I also changed), it was the right solution my system is again operational. Thank you for your help !
![]() |
![]() |
![]() |
![]() |
#44 |
Super Moderator
Join Date: Jul 2005
City & State: ----
My Country: Sweden
Line Voltage: 230v 50Hz
I'm a: Knowledge Seeker
Posts: 4,698
|
![]() Nice, thanks for posting the solution.
It might be a good idea to get the communication cable. So you can actually check the bus voltage and be 100% sure of the fix ![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|