-
How to program IT8585E on RT809F (H) programmer?
It wont work on ITE_ADAPTER_V1.5 board (IT8580, IT8586, IT8587 work when soldered on board)
Please help.
I tried with cable for keyboard it does not work either (Laptop is G750JZ)
005: The currently selected:IT8585_ISP @PEB-1, capacity: 1Mbits, 128Kbytes.
006: http://www.ifix.net.cn/thread-47221-1-1.html
007: >------------------------------------OK---------------------------------------<
008: Wait for the chips enter into the ISP status, please wait...
009: Wait...10-28-2021, 01:35 PM -
The freebie laptop started to give error "BIOS wait EC input buffer empty fail (timeout). What does it mean, empty CMOS battery?
It boots if I press F1, the Bios also works, but it hangs for 1 second about 10 times a minute. So does the touchpad in Windows, USB-mouse works normally. -
Another dump find, so someone must have given up on it already.
The list price was $700, so I figure it's worth giving it a try.
When I plug it in, the display briefly says Hello, then the volume level, the scrolls Please Wait. There are 4 LEDs under the display words that go in a three second loop of 2 inner on, all 4 on, all 4 off.
From the remote, the volume level changes on the display, but that seems to be the only activity.
The owners manual says to hold the microphone mute button for 5 seconds to reset, but nothing there.
...06-12-2023, 10:17 AM -
Hello have this hotair and soldering iron station that is not work.
have anybody schematic for it? -
The dial lets me change the temperature setting but it always stays at 006. I’ve tried replacing the heater element (even though original tested fine) and no difference. Air flow still works fine. Any ideas?
Working...
😀
😂
🥰
😘
🤢
😎
😞
😡
👍
👎
☕
Comment