RCUnlocker - Page 22

Raiderman · 06-18-2022, 03:43 PM

Is there a way to dump the bios using software?

**Vesko356** · 06-18-2022, 03:46 PM

Quote:

Originally Posted by Raiderman

Is there a way to dump the bios using software?

No, sorry.

Raiderman · 06-18-2022, 04:10 PM

Quote:

Originally Posted by SMDFlea

Yes thats a WSON8 chip, don`t use the clip on that,you risk damaging the chip,shorting the surrounding components and cutting through traces.

Your options are to desolder it,use a WSON8 pogo pin adapter,or try to solder some thin wires to the protruding solder or traces caps and resistors

https://www.aliexpress.com/item/1005003313016522.html

So that probe linked here is used in a similar fashion as the clip I already purchased? If so I will get it.
6x8mm or 5x6mm?
Its okay to still use the clip on the MXIC chip?

*Nevermind, I ordered both sizes

**Vesko356** · 06-18-2022, 04:55 PM

Quote:

Originally Posted by Raiderman

So that probe linked here is used in a similar fashion as the clip I already purchased? If so I will get it.
6x8mm or 5x6mm?
Its okay to still use the clip on the MXIC chip?

*Nevermind, I ordered both sizes

According to the datasheet must be 8x6-mm.

Quote:

W25Q256JV is offered in an 8-pad WSON 8x6-mm (package code E), a 16-pin SOIC 300-mil (package
code F) and two 24-ball 8x6-mm TFBGA (package code B & C) packages as shown in Figure 1a-c
respectively. Package diagrams and dimensions are illustrated at the end of this datasheet.

Looking at the photos of the ad, I have some doubts about the efficiency and the ease of use of these probes, but we will find out anyway when you get them. I hope they'll work well.

Raiderman · 06-18-2022, 05:11 PM

Quote:

Originally Posted by Vesko356

According to the datasheet must be 8x6-mm.

Looking at the photos of the ad, I have some doubts about the efficiency and the ease of use of these probes, but we will find out anyway when you get them. I hope they'll work well.

Thank you Vesko

**Vesko356** · 06-18-2022, 05:16 PM

Quote:

Originally Posted by Raiderman

Thank you Vesko

You're welcome.

Quote:

Originally Posted by Raiderman

Its okay to still use the clip on the MXIC chip?

It's hard to answer - I forgot to take the crystal ball with me today.
However, if you show pictures of both, I could try

Raiderman · 06-18-2022, 05:27 PM

Quote:

Originally Posted by Vesko356

You're welcome.

It's hard to answer - I forgot to take the crystal ball with me today.
However, if you show pictures of both, I could try

Here is a pic

**Vesko356** · 06-18-2022, 05:44 PM

Quote:

Originally Posted by Raiderman

Here is a pic

It's the same WSON 8 type spi chip as the other one, so you will be able to use the probes you ordered for both.
The clamps are used for the other type of spi chip which is called SOP8 or SOIC-8:

Here is a picture of the two types side by side for comparison:

Raiderman · 06-19-2022, 07:58 AM

Quote:

Originally Posted by Vesko356

It's the same WSON 8 type spi chip as the other one, so you will be able to use the probes you ordered for both.
The clamps are used for the other type of spi chip which is called SOP8 or SOIC-8:

The one on the right is definitely like my windbond chip.

NiHaoMike · 06-20-2022, 08:48 PM

Would it be possible to run it on Linux? After extracting the archive, it appears to be based on Python and I assume would be trivial to port.

ryankou · 06-24-2022, 10:31 AM

anyone could help on this asus chromebox lock. Tried the program wont' unlock it. I have 5 of this with enrollment lock, any one could share the process of unlock. SN changed, still not working.
also attached unlocked bin won't work using the program.

**peste** · 06-24-2022, 10:38 AM

Quote:

Originally Posted by ryankou

anyone could help on this asus chromebox lock. Tried the program wont' unlock it. I have 5 of this with enrollment lock, any one could share the process of unlock. SN changed, still not working.
also attached unlocked bin won't work using the program.

read post # 1 from this thread ..

**SMDFlea** · 06-24-2022, 10:40 AM

Quote:

Originally Posted by ryankou

anyone could help on this asus chromebox lock. Tried the program wont' unlock it. I have 5 of this with enrollment lock, any one could share the process of unlock. SN changed, still not working.
also attached unlocked bin won't work using the program.

You have already posted your request in the Desktop PC bios requests forum - https://www.badcaps.net/forum/showthread.php?p=1143579

This part of the forum is for laptop bios requests ONLY.

ryankou · 06-24-2022, 10:49 AM

Quote:

Originally Posted by peste

read post # 1 from this thread ..

.
Sorry, didn't see the chromebox is supported. Thought they are the same.

clrscr · 06-28-2022, 10:19 AM

RCUnlocker. not working. why? ( my laptop setup. window 10 64 bit)
show sms: Error 0xc00007b “Application was unable to start correctly”
every one help me!
thanks

**SMDFlea** · 06-28-2022, 10:23 AM

Usage: Drag and drop .bin file to .exe file.

clrscr · 06-28-2022, 10:56 AM

Quote:

Originally Posted by SMDFlea

Usage: Drag and drop .bin file to .exe file.

yes, but tool not working >> show sms: Error 0xc00007b “Application was unable to start correctly”
can you help me unlock!
thanks!

**SMDFlea** · 06-28-2022, 11:45 AM

Quote:

Originally Posted by clrscr

yes, but tool not working >> show sms: Error 0xc00007b “Application was unable to start correctly”
can you help me unlock!
thanks!

You have already posted your bios in another thread.....

https://www.badcaps.net/forum/showthread.php?t=103652

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*

You MUST NOT:

https://www.badcaps.net/forum/showthread.php?t=103570
Post a request in multiple threads
Post a request multiple times

**SMDFlea** · 06-28-2022, 11:49 AM

Quote:

Originally Posted by clrscr

yes, but tool not working >> show sms: Error 0xc00007b “Application was unable to start correctly”
can you help me unlock!
thanks!

Search google for the error message "0xc00007b" ,theres a number of reasons why,such as youre tring to run the app on a 32bit OS, the .NET framework is corrupt or not latest version, and more results

clrscr · 06-28-2022, 05:34 PM

Quote:

Originally Posted by SMDFlea

Search google for the error message "0xc00007b" ,theres a number of reasons why,such as youre tring to run the app on a 32bit OS, the .NET framework is corrupt or not latest version, and more results

now it work, thanks!

the software is compatible with HP Elitebook 840 G6. bios chip 32M. ?

06-18-2022, 03:43 PM	#421
Raiderman New Member Join Date: Jun 2022 City & State: Nampa, Idaho My Country: U.S.A. I'm a: Knowledge Seeker Posts: 18	Re: RCUnlocker Is there a way to dump the bios using software?

06-20-2022, 08:48 PM	#430
NiHaoMike New Member Join Date: Jun 2022 City & State: Austin, TX My Country: USA Line Voltage: 120VAC 60Hz I'm a: Hardcore Geek Posts: 3	Re: RCUnlocker Would it be possible to run it on Linux? After extracting the archive, it appears to be based on Python and I assume would be trivial to port.

06-24-2022, 10:31 AM	#431
ryankou Ryan @niway Join Date: Oct 2016 City & State: saskatoon My Country: canada I'm a: Knowledge Seeker Posts: 27	Re: RCUnlocker anyone could help on this asus chromebox lock. Tried the program wont' unlock it. I have 5 of this with enrollment lock, any one could share the process of unlock. SN changed, still not working. also attached unlocked bin won't work using the program. Last edited by SMDFlea; 06-24-2022 at 10:40 AM..

06-28-2022, 10:23 AM	#436
SMDFlea Super Moderator Join Date: Jan 2018 City & State: York My Country: UK I'm a: Knowledge Seeker Posts: 13,878	Re: RCUnlocker Usage: Drag and drop .bin file to .exe file.