Please help me identify these electrolytics brand

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Physios
    New Member
    • Mar 2021
    • 4
    • Italia

    #1

    Please help me identify these electrolytics brand

    Good morning.

    Is it possible to understand the brand of these two smd electrolytic caps from the type of screen printing?

    Thanks
    Attached Files
  • turbo1600
    New Member
    • Jun 2021
    • 1
    • australia

    #2
    Re: Please help me identify these electrolytics brand

    whats the pcb from ?

    Comment

    Related Topics

    Collapse

    • ckrtech
      Help Identify cap brand and quality, please
      by ckrtech
      This is a cap on a motherboard from 1994. “Ark” is the only brand I know of that has an A inside a rectangle, but I wanted to run it by you guys and get any thoughts on quality.

      Thanks in advance....
      06-09-2025, 12:28 PM
    • oldirdey
      Need help to identify capacitor brand
      by oldirdey
      Want to repair some broken floppy disk drives. I need help to identify the brand of this capacitor to find a suitable replacement.

      Did someone know the brand of the capacitor or a suitable replacement in terms of esr / ripple?...
      07-15-2021, 03:17 AM
    • Stanley1843
      BEST 505 Vs Mechanic Brand Reballing Balls with Lead
      by Stanley1843
      Hello,
      has anyone use these Brands of solder balls? The brand BEST writes on the label of the jar the specs of the solder balls instead of the Mechanic brand. I beleive that BEST brand must be more professional (in labeling at least) but I have never try one of them so I would like your opinion. By the way I hardly can I find the Mechanic brand in aliexpress (the only where I found was lead free solder balls) and on ebay these that I found are approximately15USD per jar. If you know any other trusted brand of solder balls please tell me.
      06-22-2024, 11:06 AM
    • thesame
      DVR HIKVISION DS-7208HWI-E1/A BOARD DS-80104 REV 2.2 help identify burnt components
      by thesame
      Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
      The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .

      ​...
      02-27-2024, 04:31 AM
    • silver60618
      Lenovo Legion 7 - Help Identify IC
      by silver60618
      Hi gang, its a long shot, but working on Lenovo Legion Pro 7 motherboard NM-F091, and trying to identify this component near GPU with marking "eHFQH" that is burned and shorting the board. Looks like power management IC

      I couldnt find any schematic or boardview. The CPU side also has same chip. Any way to identify this chip? or take measurements from the good chip to determine what it is?

      Any help would be appreciated...
      07-02-2025, 12:16 PM
    • Loading...
    • No more items.
    Working...