Asus N501JW - EC programming help request

[gergely]

Good Morning everyone!

I've got this laptop with a shorted EC - IT8585VG. I have the RT809F programmer and i have no idea how to programm the EC.

I've found a video online about this but quality is so bad i cant see anything.
Tried to do with flex cable to the keyboard connector with no luck.
Didnt find any pinout/datasheet for this chip. Checked older posts, nothing
Found some other post on vina, unfortunatly i need to pay to see the pictures.

Anyone could help me in this?
Thanks

[reformatt]

Re: Asus N501JW - EC programming help request

There is a boardview available for this motherboard. Use the pinout from J3101 to map the KSI/KSO lines for the EC to the programmer. Personally I use a SVOD but I found this for the RT809F:

https://www.yumpu.com/en/document/re...er-instruction

Mapping for the EC is under section 4.6. I don't know if there is a full english version of the manual.

My recommendation is you are going to do EC programming on a regular basis is make the investment in a SVOD programmer. The interface is far more intuitive and far less convoluted than the cheaper chinese programmers.

[myth77]

Re: Asus N501JW - EC programming help request

On asus boards EC is programmed automatically on start but only if EC is empty/new. If you have used EC then you have to delete it first.

[gergely]

Re: Asus N501JW - EC programming help request

thanks