Hi,
I had one friend receiver that has a problem. It's a DENON AVR1609. When i turn on, the received relay click, everything is displayed and turned OFF after 2 seconds. The red light flash interval of .5 seconds.
I replace 3 IN4007 diodes on the main pw entry supply that was faulty. It does the same problem. I found 4 IN4007 diodes in the main exit power where the 2 fuses are located in the transformator input in a board that show "0" of reading in circuit. I've unsoldered, but when unsoldered, measures came back to life by reading 0.5 in diode testing? WTF? i've tested 3 times before unsolder them.
I know that received has a lot of problem. Can someone help me with that please? Im stuck with the same problem. Thanks.
Any help is appreciated.
I had one friend receiver that has a problem. It's a DENON AVR1609. When i turn on, the received relay click, everything is displayed and turned OFF after 2 seconds. The red light flash interval of .5 seconds.
I replace 3 IN4007 diodes on the main pw entry supply that was faulty. It does the same problem. I found 4 IN4007 diodes in the main exit power where the 2 fuses are located in the transformator input in a board that show "0" of reading in circuit. I've unsoldered, but when unsoldered, measures came back to life by reading 0.5 in diode testing? WTF? i've tested 3 times before unsolder them.
I know that received has a lot of problem. Can someone help me with that please? Im stuck with the same problem. Thanks.
Any help is appreciated.
Comment