Hp bdl51 la-d713p bios dump

[SMDFlea]

Re: Hp bdl51 la-d713p bios dump

I have this motherboard with bios eprom damaged, if I take a backup, data are unreadable so I don't know what is my BID. How can I solve ?
Thanks

Are you using a CH341A programmer

[Stil86]

Re: Hp bdl51 la-d713p bios dump

Are you using a CH341A programmer

I'm using an Easy Jtag+ with EasyJtag SPI Flasher software

[SMDFlea]

Re: Hp bdl51 la-d713p bios dump

I'm using an Easy Jtag+ with EasyJtag SPI Flasher software

I`m not familiar with the EasyJtag programmer,this might help you though https://forum.gsmhosting.com/vbb/f67...g-box-2808561/

[Stil86]

Re: Hp bdl51 la-d713p bios dump

This is not the first time I try to use easy jtag to flash a bios but this eprom is faulty and I don’t know how to choose the right bios
In my case I have followed this video to create my adapter https://youtu.be/ar1vbE7X_Fo

[Leonardoa26]

Re: Hp bdl51 la-d713p bios dump

Hello, I am trying to program the bios for this motherboard, I am using the CH341A programmer, it only recognizes the chip when the motherboard of the laptop is connected to the power but when I unplug it it does not recognize the bios, I already programmed it with the board plugged into the power and even so the laptop does not start, what do you think is happening?

[hoaca388]

Re: Hp bdl51 la-d713p bios dump

Hello, I am trying to program the bios for this motherboard, I am using the CH341A programmer, it only recognizes the chip when the motherboard of the laptop is connected to the power but when I unplug it it does not recognize the bios, I already programmed it with the board plugged into the power and even so the laptop does not start, what do you think is happening?

With CH341A you have to remove the chip from the mainboard

[laptopbn]

Re: Hp bdl51 la-d713p bios dump

ok 100% thanks sir