Announcement

Collapse
No announcement yet.

Hot air station

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hot air station

    Is it better to go hot and quick or run it about 350 to remove an ic? Thanks

    #2
    Re: Hot air station

    i use 360 for unleaded solder.
    even that can struggle with some laptops that seem to have solder with no copper in it!

    Comment


      #3
      Re: Hot air station

      I cover adjacent areas with kapton, get a chip popper on the chip and blast it at 400C until the chip goes airborne. But that's for items I'm going to replace, it might be too hot for something that will be put back.

      Comment

      Working...
      X