ESR meter upgrades

[vinceroger69]

Originally Posted by Per Hansson

Yes

For the extra money i wish i ordered this now
http://www.ebay.co.uk/itm/2221248490...%3AMEBIDX%3AIT
if i get a refund for my kit i will purchase one of these then i can send the values too you etc.

[Per Hansson]

Cheers!
Do note that the original seller you bought from (At least the one you linked to originally)
Also sells it assembled.
So he really should be able to get you either a schematic or at least a picture of it assembled

http://www.ebay.com/itm/2016-EZM328-...-/331800111900

[vinceroger69]

Originally Posted by Per Hansson

Cheers!
Do note that the original seller you bought from (At least the one you linked to originally)
Also sells it assembled.
So he really should be able to get you either a schematic or at least a picture of it assembled

http://www.ebay.com/itm/2016-EZM328-...-/331800111900

ive emailed the seller a few time all he says in the return messages is "so you cant weld this" i think he means solder it and he has no schematic ive asked twice and to confirm one of yesterdays post i made

sorry about the confusion (was one of those days yesterday nothing went rite) i misscounted the ebay picture and now just re checked the kit all again yes there are 24 spots on my pcb and 24 resistors fitted on the ebay picture yes just counted ny resistors again 23 plus 1 zero ohm (which isnt shown in any ebay pictures) but without any schematic im still stuck anyway.

[Per Hansson]

Ok, incase you did not notice the picture in his eBay AD is not of the item he sells.
They are watermarked "kiss_buy".
That seller does have the same meter for sale, search for "ESR 2016" in his eBay store...

[GoNz0]

I hope the banggood kit has instructions!

[vinceroger69]

Originally Posted by Per Hansson

Ok, incase you did not notice the picture in his eBay AD is not of the item he sells.
They are watermarked "kiss_buy".
That seller does have the same meter for sale, search for "ESR 2016" in his eBay store...

Thanks i have just noticed that too.

[vinceroger69]

Originally Posted by GoNz0

I hope the banggood kit has instructions!

which kit did you go for have you got a link.

[GoNz0]

Originally Posted by vinceroger69

which kit did you go for have you got a link.

http://www.banggood.com/DIY-M12864-G...-p-997023.html

[vinceroger69]

Originally Posted by GoNz0

http://www.banggood.com/DIY-M12864-G...-p-997023.html

if you look really closely at the pcb you can see it has the parts printed on it so your fine with that kits thats a good price too i keep forgetting about that site.

[GoNz0]

Originally Posted by vinceroger69

if you look really closely at the pcb you can see it has the parts printed on it so your fine with that kits thats a good price too i keep forgetting about that site.

Good point!
Thanks.

[stj]

post pics of both sides of the pcb that are good enough to see all the tracks clearly.
i'll work it out for you.

[vinceroger69]

Originally Posted by stj

post pics of both sides of the pcb that are good enough to see all the tracks clearly.
i'll work it out for you.

stj if you mean mine i will post some asap as light here at the minute is too bad too take any good ones, so bear with me thanks.

[stj]

i almost finished the pcb stuffing list,

verify something for me.
x2 110 ohm
x1 5.6k

are you sure about those - specially the 110ohm - is it actually 1k?

[vinceroger69]

x1 5.6k measures 0.56 on 20k scale
x2 110 ohm measure 1k my mistake sorry
x1 2.2k is 2.2k (im not sure if i wrote this as 2.2ohm)

[stj]

wouldnt .56 be 560ohms?

[vinceroger69]

Resistor colour GREEN BLUE BLACK BLACK BROWN cheers for your help stj just checked using hobby -hour calculator 560 ohms

[stj]

thought so.
in that case - go build it!
----------------------------------------
r1 - 680r sensing circuit
r2 - 470k sensing circuit
r3 - 680r sensing circuit
r4 - 470k sensing circuit
r5 - 680r sensing circuit
r6 - 470k sensing circuit
r7 - 10k reset pullup
r8 - 33k power control
r9 - 3k3 power control
r10 - 27k
r11 - 100k (says r1 but is next to r10)
r12 - 10k voltage divider for battery sense
r13 - 3k3 voltage divider for battery sense
r14 - 560r display related - led current limit
r15 - 27k
r16 - 0r jumper for AVCC
r17 - 2k2 from tl431 to vcc
r18 - 1k rotary encoder current limit
r19 - 1k rotary encoder current limit
r20 - 10k rotary encoder pullup
r21 - 10k rotary encoder pullup
r22 - 470r frequency input dropper
r23 - 10k frequency input voltage divider
r24 - 10k frequency input voltage divider

rv1 - 10k preset frequency input voltage divider

u3 = tl431

q1 - 4673 (bc557c)
q2 - c945 (bc547)
q3 - c945 (bc547)

c1 - 22pf for crystal
c2 - 22pf for crystal
c3 - 100nf
c4 - 10nf
c5 - 10uf 16v
c6 - 10uf 16v
c7 - 100nf
c8 - 100nf
c9 - 100n frequency input DC blocker
----------------------------------------

[vinceroger69]

Originally Posted by stj

thought so.
in that case - go build it!
----------------------------------------
r1 - 680r sensing circuit
r2 - 470k sensing circuit
r3 - 680r sensing circuit
r4 - 470k sensing circuit
r5 - 680r sensing circuit
r6 - 470k sensing circuit
r7 - 10k reset pullup
r8 - 33k power control
r9 - 3k3 power control
r10 - 27k
r11 - 100k (says r1 but is next to r10)
r12 - 10k voltage divider for battery sense
r13 - 3k3 voltage divider for battery sense
r14 - 560r display related - led current limit
r15 - 27k
r16 - 0r jumper for AVCC
r17 - 2k2 from tl431 to vcc
r18 - 1k rotary encoder current limit
r19 - 1k rotary encoder current limit
r20 - 10k rotary encoder pullup
r21 - 10k rotary encoder pullup
r22 - 470r frequency input dropper
r23 - 10k frequency input voltage divider
r24 - 10k frequency input voltage divider

rv1 - 10k preset frequency input voltage divider

u3 = tl431

q1 - 4673 (bc557c)
q2 - c945 (bc547)
q3 - c945 (bc547)

c1 - 22pf for crystal
c2 - 22pf for crystal
c3 - 100nf
c4 - 10nf
c5 - 10uf 16v
c6 - 10uf 16v
c7 - 100nf
c8 - 100nf
c9 - 100n frequency input DC blocker
----------------------------------------

Big thanks for your help stj i wont be able too get back too this project untill early next week as going down the coast to visit dad (fathers day) suprise etc if weathers nice may spend a few extra days but will update this thread when built.

[vinceroger69]

Originally Posted by vinceroger69

Big thanks for your help stj i wont be able too get back too this project untill early next week as going down the coast to visit dad (fathers day) suprise etc if weathers nice may spend a few extra days but will update this thread when built.

sorry i forgot too post this yesterday
c5 and c6 are 100uf 25 volts in the kit
then i have x4 104j
x1 103j

cheers again stj for your help

[stj]

16v was a minimum figure,

104 = 100nf
103 = 10nf