55PUS6031 Vestel 17MB120 reboot

[yokoono]

Re: 55PUS6031 Vestel 17MB120 reboot

Hello. I have the same problem as you. I need to reinstall the firmware of my 55pus6031. I did but the file was wrong. The television is rotated 180 degrees and only responds to the Toshiba remote. Would you still have the appropriate software? Thank you

Copy the TV profile (profile+pq) on a stick and post it here.

[Ginkgo]

Re: 55PUS6031 Vestel 17MB120 reboot

maybe this information will help. Thank you so much

[lotas]

Re: 55PUS6031 Vestel 17MB120 reboot

Hello. I have the same problem as you. I need to reinstall the firmware of my 55pus6031. I did but the file was wrong. The television is rotated 180 degrees and only responds to the Toshiba remote. Would you still have the appropriate software? Thank you

You did not try to download this native firmware
https://www.p4c.philips.com/cgi-bin/...scy=GB&slg=ENG

[Ginkgo]

Re: 55PUS6031 Vestel 17MB120 reboot

Thanks for the reply. The firmware installs successfully but the Philips remote still doesn't work and the screen is still rotated 180 degrees.

[Cornito]

Hello,

Sorry for reopening this post but I've got the same kind of issue.
Reflash Philips 43pus6031 with the generic Vestel firmware.
And now tv is working but stuck on first installation.
I'm not able to add the new pin code because remote is not appeared anymore.

Is there any possibility to reflash without the remote or modify the software parameters to force the Philips remote?

Regards

[Cornito]

Auto Reply,

I needed to use universal remote control with Vestel parameters in order to move forward.
I didn't found any solution to set back the original remote