Announcement

Collapse
No announcement yet.

Vestel 17MB120 panel change

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vestel 17MB120 panel change

    Hi everyone,

    Firstly please forgive me, I've scoured these forums for a answer prior to posting so apologies if this has been answered already,

    So I'm having a issue with changing the panel on a vestel 17mb120 board, I want to put a board from a 49inch jvc tv into a 50 inch polaroid tv. The JVC board has live tv recording feature and 2 extra hdmi ports hence why I want to upgrade.

    So the steps I've taken so far..

    1. downloaded the pq files from the polaroid board

    2. Swapped out the polaroid board for the jvc board in the tv

    3. Using a comletely blank USB created a folder called "pq" and placed only the "VESTEL_D1_Plus_PNL.bin" file in the folder, done the USB operations in service menu

    4. Turned off the tv off and on again

    The screen is still displayed incorrectly and now in the service menu the panel now displays as "File Not Found" whereas prior it would say something like 49_JVC_UHD

    What exactly am I doing wrong?

    #2
    Re: Vestel 17MB120 panel change

    After copying the profile to the TV, exit the menu and turn off the TV from the remote control. After the stby LED stops flashing, unplug the TV. Wait for the stby LED to completely go out. Plug in and turn on the TV.
    Put the 2 files in the pq folder (PNL + TMG).
    Last edited by yokoono; 05-02-2022, 06:53 AM.

    Comment


      #3
      Re: Vestel 17MB120 panel change

      Thanks for the speedy reply, sorry for wanting to clarify ive bricked up one board already, so

      1. Copy the PNL file to the tv
      2. Turn off tv with remote, led stops flashing, unplug tv, wait for standby light to go out
      3 turn on tv plug in usb with both PNL and TMG files on
      4. Do the USB operation in service menu

      Am I right?

      Comment


        #4
        Re: Vestel 17MB120 panel change

        1. copy the pnl and tmg files to the pq folder
        2. turn on the tv and insert the stick into the usb
        3. type MENU 4725 and go to USB Operations
        4. Press OK on the remote control and wait 5 seconds.
        5. Exit the menu and turn off the TV on the remote control
        6. Wait until the stby LED stops flashing and unplug the TV
        7. Wait until the stby LED goes out and remove the stick.
        8. Plug in the TV and turn it on.

        Comment


          #5
          Re: Vestel 17MB120 panel change

          Lovely, thank you

          Comment


            #6
            Re: Vestel 17MB120 panel change

            https://www.youtube.com/watch?v=LunD...chaelDranfield
            I assume no responsibility for any stupid suggestions I might post.

            Comment

            Working...
            X