Re: Dell P1110 21" CRT repair thread
ok I done a video of this monitor starting cold, no crackling or flashes this time
( sometimes it does not make)
as you can see the black is tinted in green, is out of brightness but this can't be noted very well in the video
I was exaggerating about taking 1 hour to full stabilize in good colors and normal brightness, it takes around 20-25 mins, I controlled using a clock
also another wrong thing I said is the monitor is based on the sony G500, according to the specs it seems is a sony G520
Tomorrow I will make the IC406 mod and I will use windas to normalize G2 to a normal level if is required ,and I will upload a new video starting in cold
https://youtu.be/ndTqymJUZVc
ok I done a video of this monitor starting cold, no crackling or flashes this time
( sometimes it does not make)
as you can see the black is tinted in green, is out of brightness but this can't be noted very well in the video
I was exaggerating about taking 1 hour to full stabilize in good colors and normal brightness, it takes around 20-25 mins, I controlled using a clock
also another wrong thing I said is the monitor is based on the sony G500, according to the specs it seems is a sony G520
Tomorrow I will make the IC406 mod and I will use windas to normalize G2 to a normal level if is required ,and I will upload a new video starting in cold
https://youtu.be/ndTqymJUZVc
Comment