Announcement

Collapse
No announcement yet.

Need software for Intelligent universal programmer lk48

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need software for Intelligent universal programmer lk48

    I bought an universal programmer but I cannot find the software.It comes out in different names (Dataman 48uxp ,Labtool 48uxp etc).Maybe someone can help me find it .
    The device looks like this

    Thanks in advance,
    Last edited by ducky29; 12-05-2016, 02:48 PM.

    #2
    Re: Need software for Intelligent universal programmer lk48

    it's made by advantech
    http://www.aec.com.tw/
    [free]
    http://www.aec.com.tw/software_files/LT48UXP_83203.exe

    [needs a license / hack]
    http://www.aec.com.tw/10.htm

    Comment


      #3
      Re: Need software for Intelligent universal programmer lk48

      Originally posted by stj View Post
      Thank you! Ill test it when I get back home on Saturday! Thanks again!

      Comment


        #4
        Re: Need software for Intelligent universal programmer lk48

        I also own one of those, unfortunately
        Got it in exchange for something else back in 200x.
        Not only are the adapters very expensive as the software really sucks.
        On top of that you have to own a valid s/w license and keep spending money on every master release.

        To get an inside peak:
        48UXP (hw)

        Btw, if you find a full working software version please share.
        .

        Comment


          #5
          Re: Need software for Intelligent universal programmer lk48

          do you have the XP or the UXP ??


          btw, you can use universal adapters from ebay.

          Comment


            #6
            Re: Need software for Intelligent universal programmer lk48

            Originally posted by stj View Post
            do you have the XP or the UXP ??
            btw, you can use universal adapters from ebay.
            The UXP version. Yes i'm aware. Thanks.
            Still the free software version makes it a piece of junk, useless really

            Comment


              #7
              Re: Need software for Intelligent universal programmer lk48

              is it really missing that many devices?

              can you use the UXP model with the parallel port using the XP software?

              Comment


                #8
                Re: Need software for Intelligent universal programmer lk48

                Originally posted by stj View Post
                is it really missing that many devices?
                can you use the UXP model with the parallel port using the XP software?
                Yes! It might not be in quantity but any device that became ordinary is not supported, e.g. NAND flash.
                And for older common devices you really don't need it.

                Yes u can. I've tested it myself under XP (not sure with older version though).
                Releases for OS Vista / newer don't work with the parallel port, only USB port.
                .

                Comment


                  #9
                  Re: Need software for Intelligent universal programmer lk48

                  newer versions DO work with the parallel port if you have the driver for the port.
                  if you can get the 48XP soft to recognise the programmer, i can help with the license.
                  i'm attaching a seperate driver.

                  btw, the hardware cant support NAND no matter what software version you have.
                  what eprom version is in yours? i have 3.10
                  Attached Files

                  Comment


                    #10
                    Re: Need software for Intelligent universal programmer lk48

                    btw, when i say XP, i dont mean the operating system - i mean 48XP software

                    Comment


                      #11
                      Re: Need software for Intelligent universal programmer lk48

                      Originally posted by stj View Post
                      newer versions DO work with the parallel port if you have the driver for the port.
                      if you can get the 48XP soft to recognise the programmer, i can help with the license.
                      i'm attaching a seperate driver.

                      btw, the hardware cant support NAND no matter what software version you have.
                      what eprom version is in yours? i have 3.10
                      Yes it recognizes the programmer but stays in demo mode due to license.
                      Can you please help me 'fixing' this issue?

                      Firmware Version: 3.10
                      It really stinks not supporting NAND flash.
                      Do you know any cheap solution? Really need support for those.
                      I'm desperate to get my hands on a 512Mbit (NAND512W3A2SN6).
                      .

                      Comment


                        #12
                        Re: Need software for Intelligent universal programmer lk48

                        pm'd

                        Comment


                          #13
                          Re: Need software for Intelligent universal programmer lk48

                          Originally posted by stj View Post
                          pm'd
                          Thanks stj
                          Magic really happens
                          .

                          Comment


                            #14
                            Re: Need software for Intelligent universal programmer lk48

                            XP dosent automaticlly install the drivers. Can some help with them?
                            XP 32 bit.

                            Comment


                              #15
                              Re: Need software for Intelligent universal programmer lk48

                              what drivers?

                              Comment


                                #16
                                Re: Need software for Intelligent universal programmer lk48

                                Originally posted by stj View Post
                                what drivers?
                                XP dosent recognize the hardware when I connect the programmer.

                                Comment


                                  #17
                                  Re: Need software for Intelligent universal programmer lk48

                                  usb?

                                  Comment


                                    #18
                                    Re: Need software for Intelligent universal programmer lk48

                                    Originally posted by stj View Post
                                    usb?
                                    Ya. Also tried it on different slots. Still dosent recognize the programmer.

                                    Comment


                                      #19
                                      Re: Need software for Intelligent universal programmer lk48

                                      with the programmer on, and a tested usb cable, does windows find *anything* ??
                                      if yes - what is the VID & PID

                                      and did you test it with the parallel cable?

                                      Comment


                                        #20
                                        Re: Need software for Intelligent universal programmer lk48

                                        Originally posted by stj View Post
                                        with the programmer on, and a tested usb cable, does windows find *anything* ??
                                        if yes - what is the VID & PID

                                        and did you test it with the parallel cable?
                                        When I connect the programmer, I go through "Find New hardware Wizard"- I pick Install the software automatically" then I get an error : Cannot install this Hardware.
                                        I haven't tested it in parallel port cuz I dont have a cable.

                                        USB\Vid_0574&Pid_ea80&Rev_0001

                                        Thank you!

                                        Comment

                                        Working...
                                        X