Hi
I have a mainb LA-B162P (cpu i5 + nvidia gpu) which sometimes turns on and after a few seconds turns off and on again as a continuous loop. or it stays on expelling heat from the fan that runs normally, but in both cases always with the black screen both internal and external, sometimes I appreciate a backlight flash for a second in the internal monitor.
i downloaded the schematic and i went to check all the voltages of the mainb and i'm ok, so i thought it was a problem with the bios ... i argued about everything and more but i have so much confusion about the procedure of how to flash from a machine that turns on electrically but does not send any signal on the screen .... KINDLY someone can teach me the steps to perform
Thanks
I have a mainb LA-B162P (cpu i5 + nvidia gpu) which sometimes turns on and after a few seconds turns off and on again as a continuous loop. or it stays on expelling heat from the fan that runs normally, but in both cases always with the black screen both internal and external, sometimes I appreciate a backlight flash for a second in the internal monitor.
i downloaded the schematic and i went to check all the voltages of the mainb and i'm ok, so i thought it was a problem with the bios ... i argued about everything and more but i have so much confusion about the procedure of how to flash from a machine that turns on electrically but does not send any signal on the screen .... KINDLY someone can teach me the steps to perform
Thanks
Comment