Announcement

Collapse
No announcement yet.

How to solve this career problem ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    How to solve this career problem ?

    Hello everybody on board.

    I am a 31 years old general electronics repair agent since 2016 located in morocco casablanca .

    I will start with my beggining and where i ended up.

    I started studying shoe making in 2009 until 2011 and worked in the field as a manufactuting programmer for one year and i finally quit due to some job challenges .

    In the fall of 2012 i decided to enter something easy to do ,
    so i chose electronics repairs .

    So i entered a " software and electronics" school and sudied automated systems repair for two years .

    I learned a lot of things from software to hardware.

    In 2016 i bought a workshop to start repairing electronics and started the buziness for 4 years .

    In those 4 years i had no problem with spare parts because i could get them from some friends in the same buziness.

    But in this year and specially with corona i am starting to lose sources of spare parts even online and the hardware gets updated real quick.

    So in your opinion what can i do to solve the problem ?
    Last edited by Pedro90; 04-27-2021, 12:49 PM.

    #2
    Re: How to solve this career problem ?

    Getting parts for anything is becoming a very real problem I do not know what the solution for this issue is but you just have to when searching for parts just pick the supplier that have the parts you are looking for

    Also I would research the vendors that the source that you did use and see where they were getting them from

    https://www.questcomp.com/

    I have run in some of these issues as well
    Last edited by sam_sam_sam; 04-27-2021, 03:18 PM.
    9 PC LCD Monitor
    6 LCD Flat Screen TV
    30 Desk Top Switching Power Supply
    10 Battery Charger Switching Power Supply for Power Tool
    6 18v Lithium Battery Power Boards for Tool Battery Packs
    1 XBox 360 Switching Power Supply and M Board
    25 Servo Drives 220/460 3 Phase
    6 De-soldering Station Switching Power Supply 1 Power Supply
    1 Dell Mother Board
    15 Computer Power Supply
    1 HP Printer Supply & Control Board * lighting finished it *


    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
    2 Hem Saw Computer Stack Board

    All of these had CAPs POOF
    All of the mosfet that are taken out by bad caps

    Comment


      #3
      Re: How to solve this career problem ?

      Thanks .

      sometimes i dont find parts on the internet .

      like this :

      Comment


        #4
        Re: How to solve this career problem ?

        china
        https://www.aliexpress.com/item/32939844112.html

        you can find almost anything there.

        Comment

        Working...
        X