I have a problem with the Bakon 950d soldering station. It worked for many years without a problem, now it warms up to the set temperature and displays the error S - E. I noticed that the MOSFET AOD425 reaches a very high temperature. Where could be the problem?
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Bakon 950d problem
Collapse
X
-
Re: Bakon 950d problem
There is some information here https://www.badcaps.net/forum/showthread.php?t=66287
Sensor - Error
The mosfet controls the element, so it is likely full ON and not turning off due to the sensor error.
-
Re: Bakon 950d problem
The fault seems to be with the seating of the element, not the solder tip.
Check this video https://www.youtube.com/watch?v=dvzHYdzb0XQ
Comment
Comment