![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Jan 2017
City & State: Atlanta, GA
My Country: USA
I'm a: Knowledge Seeker
Posts: 168
|
![]() Got a Nintendo Switch LCD FPC connector that is damaged and I need to find a compatible replacement from mouser, digikey, or something like that.
I have attached a picture of the FPC connector that I need and here is a link to a high-res picture of the whole motherboard. Thanks! |
![]() |
![]() |
![]() |
#2 |
New Member
Join Date: Jan 2020
City & State: Twickenham
My Country: United Kingdom
I'm a: Knowledge Seeker
Posts: 3
|
![]() The connector you are looking for is a Molex 503300-5310.
Widely available on eBay but can be sourced via AliExpress for less if you've got more time. Remember to use hot air from below when replacing and ensure your board is properly pre-heated first. Will take a lot of heat because of the high temp lead-free solder used. Good luck! |
![]() |
![]() |
![]() |
#3 |
New Member
Join Date: Aug 2021
City & State: new york
My Country: USA
I'm a: Hobbyist Tech
Posts: 6
|
![]() How did you find out what type of connector that is? Is there a list you went through or something? I'm curious because I want to source other connectors like that and I don't want to bother someone on a forum every time I need to find one connector.
|
![]() |
![]() |
![]() |
#4 |
Badcaps Veteran
Join Date: Feb 2014
City & State: Midlands
My Country: England
I'm a: Professional Tech
Posts: 6,794
|
![]() Count the number of pins and measure the pitch between the centre of two pins.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|