Latest curb find, Samsung UN75F6300AF, brightest at the top and getting dimmer as you go down. It has a line across the top but it's not straight across. What should be my first check, Led string voltage?
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Samsung UN75F6300AF
Collapse
X
-
Re: Samsung UN75F6300AF
Ok tested the 4 caps on board for backlight and get around 350v on 2 then 188 and 216 on the other 2. So am I better off replacing all strips or just some leds. The only thing that worries me is the line across the top that veers down at edge. What are y'all's thoughts? Thanks Michael
Comment
-
Re: Samsung UN75F6300AF
Well after putting it back together, I have 3 vertical lines in the display. Could it be t-con ribbon cable not seated properly? Also one of the new strips of backlights does not work, I tested them with led tester before reassembly and one took several times to come up it would just lightly flicker. Dang I knew I should of had them replace it.....
Comment
Comment