Announcement

Collapse
No announcement yet.

sharp lc32le551u no display

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    sharp lc32le551u no display

    found a SHARP LC-32LE551U with no main board. Found one on EBAY, set now turns on, backlights come on with blue led status light. no display, tried unplugging one side of T-con cable then other - no change. 12V is present and fuses are good.

    T-con board bad ??? does anybody have schematic ??? thanks





    Attached Files

    #2
    Re: sharp lc32le551u no display

    I recently encountered SHARP LED TVs with the same model Nos. that carry different Panel Nos., Main Bds and T-CON Bds. So though you got a Main Bd to work in one way, you could have a non-working TV due to different Firmwares. The Main Bds have a unique No. associated with it for the Firmware it is loaded with.

    Comment


      #3
      Re: sharp lc32le551u no display

      in my limited experience with a few sharps, if you unplug one of the tcon to panel cables, then the side associated with that unplugged side goes white. Are you saying nothing happens at all? sounds like a problem beyond the main board, but maybe, some of the "status lines" are not correct... maybe.

      Further, which "fuses are good" are you referring to. At the tcon, at the power board?
      Last edited by budwich; 11-09-2017, 10:35 AM.

      Comment


        #4
        Re: sharp lc32le551u no display

        https://www.badcaps.net/forum/attach...8&d=1510237835

        There are many Voltage test points on that T-CON, I.E. VCC_1.8V
        So look for the test points.
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment


          #5
          Re: sharp lc32le551u no display

          backlight is on - no display. removing either side of T-con cable gibes same pic (blue screen)
          Fuse F1 is good - 12.35V on both sides of fuse.
          Vcc_1.8V + 0V
          INV_V = 0.5V
          INV_V1 = 0V
          INV_V2 = 0V

          seems like T-con is doing nothing. as far as main board is concerned - didn't have one when I got set. This main board came out of this same model # (according to EBAYer)

          Comment


            #6
            Re: sharp lc32le551u no display

            so new T-con same symptom. must be main bd version #. how do I find right one ?? can this one from ebay be programmed ??

            Comment


              #7
              Re: sharp lc32le551u no display

              got another main board - same issue. tv powers up, backlights are on. no display on screen. disconnecting cables to t-con and main makes no change.

              Andrew F. Ali mentioned firmware doesn't match main board ?? where do I find firmware to mate to main board ??
              Attached Files
              Last edited by ajshoe; 12-09-2018, 08:56 PM.

              Comment


                #8
                Re: sharp lc32le551u no display

                back of set
                Attached Files

                Comment


                  #9
                  Re: sharp lc32le551u no display

                  Don't see any firmware for this model on their site, theres a contact number or live chat. http://www.sharpusa.com/Support.aspx
                  Last edited by nomoresonys; 12-10-2018, 01:12 AM.

                  Comment


                    #10
                    Re: sharp lc32le551u no display

                    Tcon there for $9.49 if you want to try one, you can contact them to compare numbers to see if its a match. https://www.ebay.com/itm/Sharp-LC-32...Vtm:rk:13:pf:0

                    Comment


                      #11
                      Re: sharp lc32le551u no display

                      bought a t-con last week - no difference. Have contacted sharp but no response yet. going to look at screen more closely today. very frustrating tv yet fairly simple design. is there a way to force a test pattern on SHARPS ?
                      Last edited by ajshoe; 12-10-2018, 08:55 AM.

                      Comment


                        #12
                        Re: sharp lc32le551u no display

                        Did you try the live chat? they may try to ignore you, hard to tell but sometimes you get a bad board or a mismatch, could be bad from get go or be doa. Do both tcons act exactly the same and have thee same voltage test readings?
                        Last edited by nomoresonys; 12-10-2018, 09:30 AM.

                        Comment


                          #13
                          Re: sharp lc32le551u no display

                          both t-con boards had same result. GAVE UP. Have 2 tcons boards, 2 main boards, PSB, and LVDS if anybody needs them. they are good boards. I salvaged the led strips !! Also have stand, original remote. WOOHOO

                          Comment


                            #14
                            Re: sharp lc32le551u no display

                            Good afternoon, I was checking your chat in the forum, I need the dump of that sharp card, because I can't find it on the web.

                            sharp 32le551u board 0171-2271-5411 part list sharp 3632-2682-0150
                            Last edited by SMDFlea; 09-27-2020, 03:43 PM. Reason: translated

                            Comment

                            Working...
                            X