This monitor used to sometimes work when power button pressed which made it seem like a sticky power button to the original owner, now it's completely dead. No standby light no green power light.
There's no voltage key at the secondary outputs but I do measure some voltages:
5v, 5v. 2.7v the rest are 0v.
There's 3.3v at the power button which does go low to 0v when it's pressed.
Not sure if I'm to rule this a mainboard issue or not. Want to try manually turning the psu on to see if the rest of the voltages come up but don't know which pin it is. Any help would be appreciated
There's no voltage key at the secondary outputs but I do measure some voltages:
5v, 5v. 2.7v the rest are 0v.
There's 3.3v at the power button which does go low to 0v when it's pressed.
Not sure if I'm to rule this a mainboard issue or not. Want to try manually turning the psu on to see if the rest of the voltages come up but don't know which pin it is. Any help would be appreciated
Comment