Hello,
does anyone know if this board can be used if U2800 is not in perfect condition ?
Details :
Left side USB-port(s) / U3200 got killed by bad power supply (short on XB_CC1)
Receiving line XB_D2R_N<1> (directly to U2800) also damaged.
Symptoms were : 1 port dead, the other three stayed at 5V/30mA
U3200 removed, now symptoms are :
left : 1 port (XA) stays at 5V/0mA
right : both ports cycling (7 seconds) at 5V/0mA
As far as i know these boards need all four CD3215C00 working to do anything at all.
Does anyone know if there is a chance it may be useable (with right side USB working) if U3200 is replaced, as long as U2800 is damaged ?
does anyone know if this board can be used if U2800 is not in perfect condition ?
Details :
Left side USB-port(s) / U3200 got killed by bad power supply (short on XB_CC1)
Receiving line XB_D2R_N<1> (directly to U2800) also damaged.
Symptoms were : 1 port dead, the other three stayed at 5V/30mA
U3200 removed, now symptoms are :
left : 1 port (XA) stays at 5V/0mA
right : both ports cycling (7 seconds) at 5V/0mA
As far as i know these boards need all four CD3215C00 working to do anything at all.
Does anyone know if there is a chance it may be useable (with right side USB working) if U3200 is replaced, as long as U2800 is damaged ?
Comment