hello guys. im working on toshiba L50-B-1K5 (DA0BLIMB6F0 rev.F) with damaged LCD cable. i replaced the cable with workin one, checked LCD display and is ok but still dont have image and backlight on the screen. damaged wire in the cable was 19v black wire which is pin 1 and 2 on conector. i checked those pins and there is 19V. tried external display on vga port and is working. LCD connector on the board looks fine no damaged pins. i cant find schematic and boardview for this board, so i was wondering can anyone guide me to repair process, what should i check next? tnx
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Toshiba L50-B-1K5 no display and backlight
Collapse
X
Comment