Hi All, I have an LG 50PK550 with the EAX61392501/10 EAY60968801 power supply board. When I turn it on it clicks and shuts off immediately, I have unpluged the power wires to to Zsus and Ysus board and it does the same thing. I have read up and replaced IC301 & d304 and checked the R927 R929 and all 3 fuses on the board and all appear ok. Still does the same, shuts off immediately with or without the z & ysus board hooked up. Any help would be appreciated. Thx
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
LG 50PK550 EAX61392501/10 EAY60968801 clicks and shuts off immediately
Collapse
X
-
Re: LG 50PK550 EAX61392501/10 EAY60968801 clicks and shuts off immediately
Have a look at the components in this repair kit and check the parts on your power supply.
http://tinyurl.com/1a2204s7Willing to help but I'm no expert.
Comment
-
Re: LG 50PK550 EAX61392501/10 EAY60968801 clicks and shuts off immediately
Check all new parts and they match old, also checked with meter and all are good. Thx
Originally posted by dick_barton View PostHave a look at the components in this repair kit and check the parts on your power supply.
http://tinyurl.com/1a2204s7
Comment
-
Re: LG 50PK550 EAX61392501/10 EAY60968801 clicks and shuts off immediately
This is a weird one, as mentioned below I checked and replaced the below components and put the the board back in and it did the exact same thing. As suggested I removed the board, reinspected and checked the complete board for cold solder joints and none were found. The board was a little dusty (I have seen much much worse) so I gave it a good dusting with a paint and tooth brush and put the board back in. Now the TV stays on now without issues, I have given it two tests for over 8 hours each. Is it possible there was some dust shorting out something on the board ??
Originally posted by goldbird78 View PostHi All, I have an LG 50PK550 with the EAX61392501/10 EAY60968801 power supply board. When I turn it on it clicks and shuts off immediately, I have unpluged the power wires to to Zsus and Ysus board and it does the same thing. I have read up and replaced IC301 & d304 and checked the R927 R929 and all 3 fuses on the board and all appear ok. Still does the same, shuts off immediately with or without the z & ysus board hooked up. Any help would be appreciated. Thx
Comment
Comment