Announcement

Collapse
No announcement yet.

LG 60PM6700 Plasma turns off after 20 min

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    LG 60PM6700 Plasma turns off after 20 min

    I'm stuck. Perfect picture, perfect sound for 20 min, then shuts itself off. Does this even with YSUS, ZSUS, and logic board disconnected from power supply. IOW, just power supply and main board with main board only connected to XR and buttons. Even with speakers and wifi module unhooked.

    I have replaced power supply board and main board, still shuts off after 20 min. If YSUS is connected to power, one of the chips under the small black metal heat sink gets very hot right before it turns itself off.

    If logic board is connected to main board, green LED flashes long-short long-short, but then changes to long-short long-long just before shutoff.

    Very frustrating, since picture and sound are perfect. Any ideas? Thanks!

    #2
    Re: LG 60PM6700 Plasma turns off after 20 min

    Bumping this. Any ideas? Thanks.

    Comment


      #3
      Re: LG 60PM6700 Plasma turns off after 20 min

      Have you checked for cold solder?

      Comment

      Working...
      X