Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Equipment Usage, Soldering, Techniques, and Reviews
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 03-28-2022, 04:04 AM   #1
myth77
Badcaps Veteran
 
Join Date: Feb 2017
City & State: Na moru
My Country: Croatia
I'm a: Knowledge Seeker
Posts: 244
Default UV solder mask - high temp resistent, recomendation?

Can someone recommend any good UV solder mask? But i need a solder mask that will stand high temperetures. The thing is...sometimes i have a bigger cooper ripped from the board, lets say mosfet pad... i reconstract it with cooper sheet, then i "glue it" with solder mask...then i use UV light...and let it cool a bit. After, i try to clean the cooper of extra solder mask..and till that part all is ok. But, when i use a soldering iron to solder that pad/cooper...the solder mask gets weaker or destroyed and finally the pad is ripped again from the board .
Is there any solder mask that will keep new pad in place and indure soldering temperatures? or it is not possible? thx
myth77 is offline   Reply With Quote
Old 03-28-2022, 05:36 AM   #2
diif
Badcaps Veteran
 
Join Date: Feb 2014
City & State: Midlands
My Country: England
I'm a: Professional Tech
Posts: 6,111
Default Re: UV solder mask - high temp resistent, recomendation?

UV mask is just that, for masking not glueing. Try some MG chemicals 2 part thermal epoxy if you want to glue and then apply high temp.
diif is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2022
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 04:38 PM.
Did you find this forum helpful?