Fluxes in Europe

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DanFen
    Badcaps Veteran
    • Apr 2017
    • 201
    • Malta

    #1

    Fluxes in Europe

    Simple question, cause it seems that all the flux related threads are from people in the US

    Where is everyone getting their fluxes from in the EU? Unfortunately my country is small and I can't find anyone, so the only option seems to be to buy online and get it shipped. The stores I found have ridiculous shipping costs.

    I've been using Mechanic stuff from China, however it's full of rosin and becomes a mess and a nightmare to clean.
    Last edited by DanFen; 01-14-2022, 07:55 AM.
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30945
    • Albion

    #2
    Re: Fluxes in Europe

    liquid? paste?
    flux to do what?

    Comment

    • DanFen
      Badcaps Veteran
      • Apr 2017
      • 201
      • Malta

      #3
      Re: Fluxes in Europe

      @stj, always to the rescue

      Paste flux for soldering. Not sure if I understood your question correctly.

      Originally posted by stj
      liquid? paste?
      flux to do what?

      Comment

      • stj
        Great Sage 齊天大聖
        • Dec 2009
        • 30945
        • Albion

        #4
        Re: Fluxes in Europe

        so you want to put it ON things, not run it under large BGA's.

        then i use this:
        https://www.aliexpress.com/item/32864986454.html

        Comment

        • caprider
          Member
          • Jan 2022
          • 24
          • Romania

          #5
          Re: Fluxes in Europe

          European provider for all things electronics: https://tme.eu/

          Comment

          • DanFen
            Badcaps Veteran
            • Apr 2017
            • 201
            • Malta

            #6
            Re: Fluxes in Europe

            Yes correct I don't have the right tools to fix BGAs.

            Originally posted by stj
            so you want to put it ON things, not run it under large BGA's.

            then i use this:
            https://www.aliexpress.com/item/32864986454.html

            Comment

            • DanFen
              Badcaps Veteran
              • Apr 2017
              • 201
              • Malta

              #7
              Re: Fluxes in Europe

              Thanks. I came across TME before, and it's good. It's however not worth shipping a buy a single tube from them... makes sense to order a couple of items then the shipping cost can be justified Although, the shipping doesn't seem to be high either (maybe I'm used to the super low shipping from China)

              Originally posted by caprider
              European provider for all things electronics: https://tme.eu/

              Comment

              • stj
                Great Sage 齊天大聖
                • Dec 2009
                • 30945
                • Albion

                #8
                Re: Fluxes in Europe

                TME wont ship to the u.k. anymore, and probably not malta either.
                fuckers.

                Comment

                Related Topics

                Collapse

                • ChaosLegionnaire
                  how do u use solid rosin flux?
                  by ChaosLegionnaire
                  i recently bought a block of solid rosin flux from aliexpress. i intend to use it for reflowing cold solder joints and cracked solder joints. but im not sure how im supposed to be using it? do i just break off bits and pieces of it with a knife and put the bits of solid rosin on the bad joint im soldering then bring on the iron?

                  i tried asking google and they pointed me to a headphone forum and eevblog? and they said to just dip the soldering iron tip into the solid block. a small piece of flux will be attached to the soldering iron tip end and im supposed to use that to reflow...
                  06-24-2020, 02:34 PM
                • chth96
                  Is it good to use chemistronic flux off es835b for flux remover?
                  by chth96
                  I want to purchase any good flux remover But "chemistronic flux off es835b" is the most common flux remover in my nation..
                  Is it good to use chemistronic flux off es835b for flux remover?
                  Or I have to purchase "3m novec flux remover" which is quite expensive in my nation?
                  11-17-2023, 07:25 AM
                • evilkitty
                  Flux causing high resistance short?
                  by evilkitty
                  Now that my de-soldering gun is working i was able to remove this panel i made about a week before i noticed a issue the F segment of digits 2 and 3 would go out, digit 2 would go before digit 3, but would come back after the humidity got down from running the ac (note the weather outside is 30.5 / 74%; panel data is from a BME280)


                  Temp is on the left humidity is on the right

                  i noticed when the humidity got up one or 2 of the center digits on the right panel would loose a segment

                  The pin out looking down from the top is (note this is common cathode)...
                  07-17-2024, 09:38 AM
                • Document Archive
                  Multifix 425-01 and 450-01 Rework Flux Datasheet
                  by Document Archive
                  REWORK FLUXES Multifix 425-01 and 450-01 are tacky fluxes designed for use in a wide range of electronics assembly and rework processes. They represent a range of activities and residue levels to meet different customer requirements.

                  - No Clean Formulations
                  - Low residue
                  - Range of activity to deal with different component solderability
                  - Halide free
                  - Suitable for dispensing
                  - Compatible with solder coatings and/or No Clean flux cored solder wire product range

                  Both products are supplied in syringes or cartridges for application by dispensing....
                  10-07-2024, 06:02 AM
                • chth96
                  How can I remove flux with the smallest rubbing?
                  by chth96
                  I have tried to bridging tiny broken trace which is shown in the below link,and I found that it is impossible to remove any flux after soldering task.
                  Is it possible bridging tiny broken trace - Badcaps - Capacitor Search Engine​​
                  Because the 0.02 mm copper wire is very very fragile,So It broke itself very easily whenever I tried to rub excess flux with cotton bud.
                  Is there any way to remove flux with the smallest rubbing or without any rubbing?
                  Any reply would be appreciated.
                  11-24-2023, 05:22 PM
                • Loading...
                • No more items.
                Working...