Hi there,
HP Envy Recline 23 doesn't power up anymore.
Power supply LED turns of directly after hooking up the plug into the base socket.
During last usage the back side, top right (near mobo, heatpipes) was really hot.
Fan was full of dust.
Disconnected all peripheral connectors (HDD, speakers, HDMI-out, audio, WLAN, etc), only the DCIN cable and FAN cable connected, the power-supply LED still goes out after plugging in the plug into the base.
Hope you guys have a schematic of motherboard DA0NZ8MB6F0 REV F.
Or any other suggestion?
HP Envy Recline 23 doesn't power up anymore.
Power supply LED turns of directly after hooking up the plug into the base socket.
During last usage the back side, top right (near mobo, heatpipes) was really hot.
Fan was full of dust.
Disconnected all peripheral connectors (HDD, speakers, HDMI-out, audio, WLAN, etc), only the DCIN cable and FAN cable connected, the power-supply LED still goes out after plugging in the plug into the base.
Hope you guys have a schematic of motherboard DA0NZ8MB6F0 REV F.
Or any other suggestion?
Comment