i tried a lot with this issue. if u heat all coponets this will work for 1 or 2 days. this issue will come back. dont feel happy. i am also stuck with this issue with e1-531 laptop
Measure → V(TP(ACDET)) = 2.6 V ± 0.1 V
Measure → V(TP(ACOK)) = 3.3 V ± 0.1 V
Measure → V(J2(SYS)) = 19.5 V ± 0.5 V
Measure → V(TP(REGN)) = 6 V ± 0.5 V
Measure → V(TP(ACDRV, CMSRC)) = 6 V ± 0.5 V
Measure → V(J2(BAT, GND)) = 2 V ± 2 V
from yours
ACOK is not good pin 5 =0.02v must be 3.3v
pin4(acdrv)-pin3(cmsrc)=6v in your case pin4-pin3=18-0.03=18v so it is not good
ACDRV must be 24V or 25V and CMSRC 18v or 19V
24-18=6V and 25-19=6V (correct voltage )
Thanks a lot for your help, very helpful informations ..
Comment