Hello Everyone the board was water damaged and switched off
so i tried to clean it with 99% spirit when it switched off.
after that i tried to switch it on and what it did was it boot then off, boot then off then eventually boots at the third attempt.
so i removed the motherboard and i then did a mild reflow on the SMC (U5000) AND Then when i tried to switch it on then nothing happens, up to now nothing is happening
VOLTAGES:
PPBUS_G3H = 8.20V
PP3V42_G3H = 3.42V
PPVRTC_G3H = 3.3V
PP5V_S5 = 0V
PP5V_S4RS3 = 0V
PP3V3_S5 = 0V
PP3V3_S4 = 0V
PP3V3_SUS = 0V
PP3V3_S3 = 0V
PP3V3_S5_AVREF_SMC = 3.29V
PM_SLP_S4_L = 0V
SMC_ONOFF_L = 3.41V
SO PLEASE CAN YOU HELP ME. I'M REALLY STUCK
I'm not sure where to start looking at
Regards;
so i tried to clean it with 99% spirit when it switched off.
after that i tried to switch it on and what it did was it boot then off, boot then off then eventually boots at the third attempt.
so i removed the motherboard and i then did a mild reflow on the SMC (U5000) AND Then when i tried to switch it on then nothing happens, up to now nothing is happening
VOLTAGES:
PPBUS_G3H = 8.20V
PP3V42_G3H = 3.42V
PPVRTC_G3H = 3.3V
PP5V_S5 = 0V
PP5V_S4RS3 = 0V
PP3V3_S5 = 0V
PP3V3_S4 = 0V
PP3V3_SUS = 0V
PP3V3_S3 = 0V
PP3V3_S5_AVREF_SMC = 3.29V
PM_SLP_S4_L = 0V
SMC_ONOFF_L = 3.41V
SO PLEASE CAN YOU HELP ME. I'M REALLY STUCK
I'm not sure where to start looking at
Regards;
Comment