Hello!
I bought this board but isn't powering on. Seller told me it was fine and stable.
Got it for a dime but it supports NX models.
Ths cpu it came with works fine and the 2gb are error free (2x1gb).
https://www.asrock.com/mb/VIA/K7VT4A%20PRO/#BIOS
I inspected the board many times and no component gets crazy hot, not even lukewarm; no traces are cut or damaged.
Battery is fine on its circuit.
The ASM1117 outputs 3.5V instead of the usual 3.3x I saw in many other boards.
https://pdf1.alldatasheet.com/datash...S/AMS1117.html
Could it be the problem or is it still within specs?
No shorts, not with gnd not between rails. ATX is all clear. Maybe I should check ohms too...
Has a 1.8V AGP 8x only slot, maybe it died because the seller tested a 3.3V gfx in it?
Thanks for any contribution, even just random ideas (you never know if crazy may help or not ).
I bought this board but isn't powering on. Seller told me it was fine and stable.
Got it for a dime but it supports NX models.
Ths cpu it came with works fine and the 2gb are error free (2x1gb).
https://www.asrock.com/mb/VIA/K7VT4A%20PRO/#BIOS
I inspected the board many times and no component gets crazy hot, not even lukewarm; no traces are cut or damaged.
Battery is fine on its circuit.
The ASM1117 outputs 3.5V instead of the usual 3.3x I saw in many other boards.
https://pdf1.alldatasheet.com/datash...S/AMS1117.html
Could it be the problem or is it still within specs?
No shorts, not with gnd not between rails. ATX is all clear. Maybe I should check ohms too...
Has a 1.8V AGP 8x only slot, maybe it died because the seller tested a 3.3V gfx in it?
Thanks for any contribution, even just random ideas (you never know if crazy may help or not ).
Comment