my diamond view 172 monitor will not display anything for some 20 min or more after I turn the computer on (have tried two dt xp computers and a laptop). All it shows is a blinking light, yellow at first, green later at about 5 sec intervals. I have tried different power and video cables - no change.
Eventually it comes up with a normal boot and once it is running, goes on forvever without problems; rebooting is OK. I also noticed that the display does not show the NO VIDEO sign at first but if it is running and I pull the video cable, it does.
I suspect that the culprit is somewhere in the internal power supply - this model plugs directly into mains.
Would appreciate any hints.
J
Eventually it comes up with a normal boot and once it is running, goes on forvever without problems; rebooting is OK. I also noticed that the display does not show the NO VIDEO sign at first but if it is running and I pull the video cable, it does.
I suspect that the culprit is somewhere in the internal power supply - this model plugs directly into mains.
Would appreciate any hints.
J
Comment