MAG LT916s recapped, wont power on
Hey everyone,
Im having a slight problem repairing my MAG LT916s LCD screen. It had the good old power off after 2 seconds problem.
I recapped the power supply unit with Panasonic EB series caps from Digikey. There is a bank of 6 25v 470s and some smaller ones i replaced. According to another member, replacing those 6 25v caps seemed to be the fix.
Now after recapping i cant get the unit to power on at all. I must have done something wrong while capping.. Anyone have any ideas of what I should check? I couldn't find much on what to do in my case using search :/
Thanks! andy
Im having a slight problem repairing my MAG LT916s LCD screen. It had the good old power off after 2 seconds problem.
I recapped the power supply unit with Panasonic EB series caps from Digikey. There is a bank of 6 25v 470s and some smaller ones i replaced. According to another member, replacing those 6 25v caps seemed to be the fix.
Now after recapping i cant get the unit to power on at all. I must have done something wrong while capping.. Anyone have any ideas of what I should check? I couldn't find much on what to do in my case using search :/
Thanks! andy