Working om a Macbook Pro 16" 820-01700-A board. The problem was left and right wing bottom was damaged by Cockroach. I replaced all the components that was corroded. After replaced board was turned On everything working. I put it into my ultrasonic cleaner dry the board and assembly the board was turn on anymore. PPBus was 12.69V schematics 13.1V. DC-IN only have varies from .10A to 0.04A without connecting the battery. Is the ISL9240 is bad?
Update:
T2 Chip is getting warm under infrared Camera
SCM_RSMRST_L = 0v
Update:
T2 Chip is getting warm under infrared Camera
SCM_RSMRST_L = 0v
Comment