I have a ThinkPad X270 that would not start from time to time. Now it won't start at all.
Setup: Mainboard with RAM, fan, display, speakers, and USB keyboard.
When applying power the current increases within two seconds to 560 mA and stays there. No Beep Code.
Heatsink gets hot, so CPU is running, display stays dark, not even backlight is on.
All fuses are ok and all voltage rails are ok, except GFXCORE. As far as i Know this is ok though, because it is not needed for LowRes graphics like the BIOS screen.
I have flashed two different BIOSes, both with cleaned up ME, but that didn't change anything.
Does anyone have any advice on how I should proceed?
Setup: Mainboard with RAM, fan, display, speakers, and USB keyboard.
When applying power the current increases within two seconds to 560 mA and stays there. No Beep Code.
Heatsink gets hot, so CPU is running, display stays dark, not even backlight is on.
All fuses are ok and all voltage rails are ok, except GFXCORE. As far as i Know this is ok though, because it is not needed for LowRes graphics like the BIOS screen.
I have flashed two different BIOSes, both with cleaned up ME, but that didn't change anything.
Does anyone have any advice on how I should proceed?
Comment