Announcement

Collapse
No announcement yet.

HP Envy 13-aq series KBC EC pinout

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HP Envy 13-aq series KBC EC pinout

    I want to make a backup firmware from the board KB9028Q EC but I dont have the pinouts for the keyboard connector. Does anyone knows the keyboard connector pinouts for this laptop model

    HP Envy 13-aq series

    other markings: 2019g1 Moorea 13 intel

    #2
    Re: HP Envy 13-aq series KBC EC pinout

    Usually there is more written on the board to identify it and to compare with existing programming layouts. Can you share pictures of the board with all peripherals like heatsink, tapes, WLAN card, and so on removed, both sides?
    FairRepair on YouTube

    Comment


      #3
      Re: HP Envy 13-aq series KBC EC pinout

      Originally posted by gurangax View Post
      I want to make a backup firmware from the board KB9028Q EC but I dont have the pinouts for the keyboard connector. Does anyone knows the keyboard connector pinouts for this laptop model

      HP Envy 13-aq series

      other markings: 2019g1 Moorea 13 intel
      Try the pinout at post #3 in this thread -> https://www.badcaps.net/forum/showthread.php?t=103492
      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

      Comment


        #4
        Re: HP Envy 13-aq series KBC EC pinout

        Originally posted by Sephir0th View Post
        Usually there is more written on the board to identify it and to compare with existing programming layouts. Can you share pictures of the board with all peripherals like heatsink, tapes, WLAN card, and so on removed, both sides?
        2019G1 Moorea 13 intel
        18744-1

        Comment


          #5
          Re: HP Envy 13-aq series KBC EC pinout

          Originally posted by SMDFlea View Post
          Try the pinout at post #3 in this thread -> https://www.badcaps.net/forum/showthread.php?t=103492
          I already read that post but its different. It should be easier if the chip package is larger as in KB9028Q type, but mine is the smaller package type (KB9028G).

          Due to lack of schematics and datasheets, I removed the chip which is the KB9028G package and traced the lines manually, and to my surprise none of the ISP lines goes to the keyboard socket. There is another connector which I assume is for ISP programming but the socket is not soldered, and the lines for programming the KB9028G chip goes to this socket. I will work on this slowly until I figured out how to do it.

          Do you know anything about this type of board?

          Comment


            #6
            Re: HP Envy 13-aq series KBC EC pinout

            Found the following from a Russian website:
            Irbis NB120 Board

            G116F-2 rev01
            Multi KB9028Q

            G116F-2 KB_pins=28 KSO3=11 KSI4=6 KSI7=12 KSI6=10 KSI5=9 KB9028Q



            HP ENVY X360
            Gale 4G MB_17887-1
            KB9028G
            KB_pins=32 LEFT DOWN 1MM KSO3=15 KSI4=28 KSI7=31 KSI6=30 KSI5=27



            Can you confirm your package is the BGA device?

            Comment


              #7
              Re: HP Envy 13-aq series KBC EC pinout

              Originally posted by mon2 View Post
              Found the following from a Russian website:


              Can you confirm your package is the BGA device?
              Thanks for info. yes KB9028G for BGA package

              Comment

              Working...
              X