Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting TVs and Video Sources
Register FAQ Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-08-2021, 11:03 PM   #1
Join Date: Oct 2010
City & State: Florida
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 22
Question Sceptre X505BV - Logo appears for 1 sec then backlight shuts off, LEDs tested good

Hello, this TV currently has me stumped. As the title states, when I power on the unit, the backlight comes on for 1 second then shuts off. The TV is still on, and I can see the video if I shine a flashlight on the screen.

Using the LED backlight tester I was able to confirm all LEDs are illuminating and seem to be working correctly when independently powered by this tester, so that leads me to believe there is something wrong with the power supply board.

Perhaps the great minds here can help me figure it out, as I don't see any thing obviously wrong with it. The backlight circuit seems to be controlled by an op-amp (U14). The part number for this op-amp is 10358. The hot side of the board is controlled by a FAN7930C PFC controller. I have not found any shorts on either side so far and the capacitors look to be ok.

The backlight circuit is located on the top left of the board (top view) or top right of the board (bottom view).

Thank you for your time.
Attached Images
File Type: jpg PXL_20210209_042922988.jpg (986.3 KB, 12 views)
File Type: jpg PXL_20210209_042940827.jpg (1.07 MB, 8 views)
File Type: jpg PXL_20210209_042955332.jpg (992.5 KB, 5 views)
events.b is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump Technical Forums 2003 - 2021
Powered by vBulletin ®
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 11:35 PM.
Did you find this forum helpful?