Hi,
My friend brought his Behringer Europower PMP2000D audio mixer to me still with power but no output on both speakon 2 audio ports.
The main issue is, it has no output and the main monitor levels led indicator are showing some signals whenever i attach any LINE In device such as microphone.
I tried opening the powersupply section and could not see any suspected parts.
I also removed the input board (LINE-IN) and cleaned all the switches and microphone jacks with contact cleaner because they are full of dust.
I also tried to wiggle the flex cables connecting the input board to the other boards including the powersupply board and reseated them all.
After that, i was surprised one of the speakon audio port was working well but the other was just humming loudly without any response.
What could be the common issue with this mixer?
Hope to hear from you.
Thanks
My friend brought his Behringer Europower PMP2000D audio mixer to me still with power but no output on both speakon 2 audio ports.
The main issue is, it has no output and the main monitor levels led indicator are showing some signals whenever i attach any LINE In device such as microphone.
I tried opening the powersupply section and could not see any suspected parts.
I also removed the input board (LINE-IN) and cleaned all the switches and microphone jacks with contact cleaner because they are full of dust.
I also tried to wiggle the flex cables connecting the input board to the other boards including the powersupply board and reseated them all.
After that, i was surprised one of the speakon audio port was working well but the other was just humming loudly without any response.
What could be the common issue with this mixer?
Hope to hear from you.
Thanks
Comment