so my friend here am i to give some relate about this job , so after making some measurement , i cheked having ldo 5 volts on main regulator aqltough i dont have 5 volts on coil , only 0.96 volts , but the 3.3 line is with the correct value , started cheking SPI pins and noticed having high values of 3.04 volts , on pins 1 2 5 and 6 . thinking about SPI could be on the KB(my bad here , i replacedd the kb but with no joy ) after cheking schematic notice that the spi block was on the BD itself , reflowed the BD but still the same , since i have pratically major parts of spares in stock , lifted the hm65 and replace with a new one ... TCHAM RAMM it turned on .....well not for big joy , i turned it off , once i try to turn on , well dead again !!!!
ready to close this ... guess it killer the pch again !
well we are closing this machine , each time we lift the pch machine will turn on but only once , seems like waterdamage , something weird , is happening and we've lost to much time with this unit allready . thk anyway for does who spent time creating the bios , we will keep it for future reference thats for sure .
Hi
Here is the new file i made for you .....if this don't work you have other problem ..to know if bios is working rsmrst 3.3V S5 3.3V do you have it caps light up on keyboard if pressed or usb mouse lighting up if yes to all bios is work enjoy.
Techman1025
Comment