Due to a power surge my Asus board does not power on, when I connect 24 pin power connector to motherboard (without turning on the board), the LDO regulator (UZ2085G / PU300) gets hot immediately. Hot I mean insanely hot! which burns my finger.
I replaced the LDO regulator, but it didn't help. Probably something is using high ampere and causing the regulator become hot.
So which components should I check? What's the best way to diagnose the issue?
Thanks
I replaced the LDO regulator, but it didn't help. Probably something is using high ampere and causing the regulator become hot.
So which components should I check? What's the best way to diagnose the issue?
Thanks
Comment