Announcement

Collapse
No announcement yet.

Sunpower RPS-2600 pinout?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Sunpower RPS-2600 pinout?

    Hello there!
    I have an old PSU from some server/storage, its labeled sunpower rps-2600.. i would like to use it as 12v power source for a project.. but i cant find nothing about the pinout. i looked inside and found which pins are AC.. but when i apply power it starts for 10 seconds and power off.. on the pins i also found which are 12v 5v -12v (labeled on the board).. did someone know anything about it? may be some trick like on the atx green+black to power it on?
    here is a pic of the connector https://goo.gl/photos/EriLJebYMoX7oYcL9

    #2
    Re: Sunpower RPS-2600 pinout?

    If you're saying that it has 12V output for 10 seconds then shuts down, I would guess that you need to put a load on the major power rails to keep them all regulating within tolerance. For example the 5V and 3.3V if present, see if drawing an amp or two from each works.

    Comment

    Working...
    X