Identifying a Component

[SkyHeart]

Hi guys,

I would be very grateful if someone can help identify the component in this picture.
it has 4 pins one of pins gone off while removing it from the PCB, the PCB is a Motor controller for adjustable Desk.

[petehall347]

Re: Identifying a Component

looks like its a rectifier

[R_J]

Re: Identifying a Component

SMD bridge rectifier, looks like diotec S80

[redwire]

Re: Identifying a Component

My guess is a DB-S SMT bridge rectifier, like a DB103S is 200PIV. It's about 8x6.2mm. The S80 is smaller 4.7x3.9mm. You'd have to measure the part size.

[SkyHeart]

Re: Identifying a Component

Thanks for the help guys, it does look like S80 SMD bridge which I did order some from mouser.com