Gotten this free faulty motherboard MSI 865PE Neo2-P that does not POST. CPU fan is spinning, POST card error code is d4b0. According to user manual, it is using AMIBIOS. No visible bloated caps, in circuit ESR reading for all caps quite normal.
d4 error code :- uncompressed RUNTIME code
b0 error code :- uncompressed SETUP code for hot-key
Has the following caps :-
KZG 1500uF 6.3V (x8) beside CPU
KZG 1500uF 16V (x4) near MOSFETs
KZG 1000uF 6.3V (x7)
KZG 470uF 10V (x6)
KZG 470uF 6.3V (x5)
Any suggestion if I should desolder the caps near CPU to test?
d4 error code :- uncompressed RUNTIME code
b0 error code :- uncompressed SETUP code for hot-key
Has the following caps :-
KZG 1500uF 6.3V (x8) beside CPU
KZG 1500uF 16V (x4) near MOSFETs
KZG 1000uF 6.3V (x7)
KZG 470uF 10V (x6)
KZG 470uF 6.3V (x5)
Any suggestion if I should desolder the caps near CPU to test?
Comment