Announcement

Collapse
No announcement yet.

Batterys for Segway / Hoverboard / Balance Board

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Batterys for Segway / Hoverboard / Balance Board

    Sorry if this is a silly question, but my son has a ride on hoverboard.

    It needs a new battery pack (current one fitted shown in pic)

    My question is, can I fit one with a higher Ah rating? As long as it is 36v? And if so how high Ah can I go??

    Would these be any good? £9.61 50%OFF | 100% Original 36v 30Ah lithium battery 10s2p 36v Battery 30000mAh lithium ion pack 42V 30000mah scooter twist car battery
    https://a.aliexpress.com/_EGTafDN

    Picture of charger also included.

    Any help grately appreciated
    Attached Files

    #2
    Re: Batterys for Segway / Hoverboard / Balance Board

    Well you need to find out what type of BMS protection board if it is just a protection board or is it a balancing protection board and what appropriate amperage is the BMS board rating

    And what type of batteries they are as well

    You can not get 30 amp hours out of battery pack that small unless it is some special type battery that has high amperage in high density type battery and it going to be a much bigger battery

    18650 batteries are at most are 3.5 amp hour 21700 batteries I am not sure exactly what the highest amps these batteries can be

    So to be 30 amp hours who knows maybe made up

    Here is what I would do is carefully take apart the heat shrink tubing on the battery pack wooden or plastic tools should only be used to avoid shorting out the battery pack and show some pictures of the inside of this battery pack

    I might be able to help you with some replacement options for the BMS protection that is in this battery pack
    Last edited by sam_sam_sam; 10-15-2022, 08:03 AM.
    9 PC LCD Monitor
    6 LCD Flat Screen TV
    30 Desk Top Switching Power Supply
    10 Battery Charger Switching Power Supply for Power Tool
    6 18v Lithium Battery Power Boards for Tool Battery Packs
    1 XBox 360 Switching Power Supply and M Board
    25 Servo Drives 220/460 3 Phase
    6 De-soldering Station Switching Power Supply 1 Power Supply
    1 Dell Mother Board
    15 Computer Power Supply
    1 HP Printer Supply & Control Board * lighting finished it *


    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
    2 Hem Saw Computer Stack Board

    All of these had CAPs POOF
    All of the mosfet that are taken out by bad caps

    Comment


      #3
      Re: Batterys for Segway / Hoverboard / Balance Board

      Originally posted by sam_sam_sam View Post
      Well you need to find out what type of BMS protection board if it is just a protection board or is it a balancing protection board and what appropriate amperage is the BMS board rating

      And what type of batteries they are as well
      I just ended up getting a battery with the same information on as the old one.

      All sorted now thanka

      Comment


        #4
        Re: Batterys for Segway / Hoverboard / Balance Board

        Originally posted by Bloopeta View Post
        I just ended up getting a battery with the same information on as the old one.

        All sorted now thanka
        There are battery options if this battery pack does not last very long or the running time is not acceptable please feel free to ask what your options could be
        9 PC LCD Monitor
        6 LCD Flat Screen TV
        30 Desk Top Switching Power Supply
        10 Battery Charger Switching Power Supply for Power Tool
        6 18v Lithium Battery Power Boards for Tool Battery Packs
        1 XBox 360 Switching Power Supply and M Board
        25 Servo Drives 220/460 3 Phase
        6 De-soldering Station Switching Power Supply 1 Power Supply
        1 Dell Mother Board
        15 Computer Power Supply
        1 HP Printer Supply & Control Board * lighting finished it *


        These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

        1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
        2 Hem Saw Computer Stack Board

        All of these had CAPs POOF
        All of the mosfet that are taken out by bad caps

        Comment

        Working...
        X