Announcement

Collapse
No announcement yet.

Treadmill JK Performa 9500 turns off and on repeatedly

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Treadmill JK Performa 9500 turns off and on repeatedly

    Hello to all.

    I received as a gift a JK Performa 9500 treadmill obviously not working, it is a tool with its years but it has a good engine and a wide running surface, in short I would like to try to repair it.

    As soon as I turn it on, the display turns on for a few seconds and then turns off and then comes on intermittently without starting the engine.

    This is the engine compartment:


    Here is a filter I tried to exclude:


    This is the board:


    This is the command panel:


    Youtube video where you can see the problem:
    https://youtu.be/H-0TIN3aobw

    The problem occurs even without connected motors.

    where should I start?
    Last edited by mircot80; 11-10-2019, 11:32 AM.

    #2
    Re: Treadmill JK Performa 9500 turns off and on repeatedly

    First, get rid of all that brown glue On the circuit board. That stuff goes conductive over the years. Could we get better pictures of the board without any wires attached?
    Last edited by CapLeaker; 11-10-2019, 11:58 AM.

    Comment


      #3
      Re: Treadmill JK Performa 9500 turns off and on repeatedly

      Originally posted by CapLeaker View Post
      First, get rid of all that brown glue On the circuit board. That stuff goes conductive over the years. Could we get better pictures of the board without any wires attached?
      ok I will

      Comment

      Working...
      X