Announcement

Collapse
No announcement yet.

A 9010 o n k y o amp , schematics & help please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: A 9010 o n k y o amp , schematics & help please

    Hi

    Not had a chance to get back to it yet .

    Will update , soon as i can

    Comment


      #22
      Re: A 9010 o n k y o amp , schematics & help please

      Managed to acquire another amp .

      Swapped out the volume control , to prove beyond any doubt that's the cause of the problem.

      Stripped down the control again & this time discovered the issue .

      There's a break in some of the tracks , which i didn't notice before ,as they are at the very bottom end where the plastic frame is .

      tried to to link , but solder won't take & to be honest wouldn't have worked correctly anyway .

      Now need to source correct control .

      Can anyone help ?
      Attached Files

      Comment


        #23
        Re: A 9010 o n k y o amp , schematics & help please

        17B503 printed on casing , therefore seems to be 50K

        Comment


          #24
          Re: A 9010 o n k y o amp , schematics & help please

          Been doing some detective work of my own.

          ALPS RK16812MG seem to cover this range of motor driven potentiometers .

          From there i found adding 04YA at the end brings up a 50K type on E BAY .

          Ali Express is cheaper though.

          Only issue might be is if potentiometer track differs , but at that price , worth a pop.

          Comment


            #25
            Re: A 9010 o n k y o amp , schematics & help please

            i have in the past changed just the tracks from a parts unit . also have bought or sent to me for free from the manufacturer .

            Comment


              #26
              Re: A 9010 o n k y o amp , schematics & help please

              thanks for the info pete

              Was that on an Onkyo unit ?

              Comment


                #27
                Re: A 9010 o n k y o amp , schematics & help please

                Originally posted by zens electronics View Post
                thanks for the info pete

                Was that on an Onkyo unit ?
                no it wasn't but was same sort of pot .well the one i used from scrap unit was the same . others were different .

                Comment


                  #28
                  Re: A 9010 o n k y o amp , schematics & help please

                  I suspect Onkyo are quite tight on supplying part to non agents .

                  Here's the Ali link

                  https://www.aliexpress.com/item/32805658474.html

                  Comment


                    #29
                    Re: A 9010 o n k y o amp , schematics & help please

                    Did that worked? My Onkyo a-9010 is with the exact same problem.

                    Oficial repairer wants 170€ which is almost the same that I paid for it 6 years ago, ridiculous.

                    Comment


                      #30
                      Re: A 9010 o n k y o amp , schematics & help please

                      Yes worked a treat

                      Comment


                        #31
                        Re: A 9010 o n k y o amp , schematics & help please

                        Thank you! Is this the same https://pt.aliexpress.com/item/10050...rch-mainSearch
                        ?

                        it says 20mm instead of 25

                        Comment


                          #32
                          Re: A 9010 o n k y o amp , schematics & help please

                          Probably best to stick to link i posted , as that one fitted in well .

                          Comment


                            #33
                            Re: A 9010 o n k y o amp , schematics & help please

                            It's out of stock the one you posted

                            Comment

                            Working...
                            X