![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Jan 2010
Posts: 64
|
![]() hi guy's im looking for a service manual for this peavey xr1212 mixer....
i have 2 parts that are burn and would like to replace them but cannot see info on them.....location is q3 and q4 so basicly,when client brought me this mixer,he have already took out these 2 parts....and what he told me is that the mixer have power but no light or disply,ect...but that the powerboard come very hot and start smelling like burning..... so i kind of need these parts to make further test.any help would be very nice.thank you |
![]() |
![]() |
![]() |
#2 |
Badcaps Veteran
Join Date: Jan 2015
City & State: worcester
My Country: United Kingdom
I'm a: Knowledge Seeker
Posts: 3,280
|
![]() have you got the schematic ? if not email peavey for it
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jan 2010
Posts: 64
|
![]() i tryed,but never got a reply.....will try again
|
![]() |
![]() |
![]() |
#4 |
Badcaps Veteran
Join Date: Nov 2016
City & State: Sofia
My Country: Bulgaria
I'm a: Knowledge Seeker
Posts: 494
|
![]() Well from picture 9 -gb19nc60kd
|
![]() |
![]() |
![]() |
#5 |
Badcaps Veteran
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 8,161
|
![]() If these two fets are blown, I suspect the driver ic is also blown, check the resistors connected to the gate and follow them back to the drive circuit. I suspect there are more issues, hopefully Peavey will provide the schematics
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jan 2010
Posts: 64
|
![]() thanks for the info,i will do as you told me to check.and yes peavey send me all schematics for this units,i let you know my progress.
|
![]() |
![]() |
![]() |
#7 |
Badcaps Veteran
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 8,161
|
![]() Can you upload the schematics?
|
![]() |
![]() |
![]() |
#8 |
Badcaps Veteran
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 39,206
|
![]()
__________________
Never stop learning Basic LCD TV and Monitor troubleshooting guides. http://www.badcaps.net/forum/showthr...956#post305956 Voltage Regulator (LDO) testing: http://www.badcaps.net/forum/showthr...999#post300999 Inverter testing using old CFL: http://www.badcaps.net/forum/showthr...er+testing+cfl Tear down pictures : Hit the ">" Show Albums and stories" on the left side http://s807.photobucket.com/user/budm/library/ TV Factory reset codes listing: http://www.badcaps.net/forum/showthread.php?t=24809 |
![]() |
![]() |
![]() |
#9 |
Badcaps Veteran
Join Date: Jan 2015
City & State: worcester
My Country: United Kingdom
I'm a: Knowledge Seeker
Posts: 3,280
|
![]() +2
|
![]() |
![]() |
![]() |
#10 |
Member
Join Date: Jan 2010
Posts: 64
|
![]() hi guy's sorry for late info but like you asked here are the peavey shematic that peavey send me.
|
![]() |
![]() |
![]() |
#11 |
Badcaps Veteran
Join Date: Jan 2015
City & State: worcester
My Country: United Kingdom
I'm a: Knowledge Seeker
Posts: 3,280
|
![]() |
![]() |
![]() |
![]() |
#12 |
New Member
Join Date: Sep 2020
City & State: St paul minnesota
My Country: United States
I'm a: Knowledge Seeker
Posts: 1
|
![]() Thanks for posting these schematics!
Hoping to repair the speaker outs on my xr 1220. |
![]() |
![]() |
![]() |
#13 | |
New Member
Join Date: Aug 2021
City & State: Liverpool
My Country: England
I'm a: Knowledge Seeker
Posts: 2
|
![]() Quote:
Hi, hope the pic will be useful for you, I had same problem blown mosfet, the part number is 26NM60N. the SMD diod marking is 14G. |
|
![]() |
![]() |
![]() |
#14 |
New Member
Join Date: Aug 2021
City & State: Liverpool
My Country: England
I'm a: Knowledge Seeker
Posts: 2
|
![]() attached pictures
|
![]() |
![]() |
![]() |
#15 |
Member
Join Date: Nov 2012
City & State: Glasgow
My Country: UK
I'm a: Knowledge Seeker
Posts: 59
|
![]() Interesting ... that mixer uses the same amplifier board as the Peavey IPR1600 power amp ...
![]() The original 2x components were IGBT's but several other fets can be used to replace. Be a good idea to remove the amplifier side power fets and check them or you may blow the new PSU fets again on 1st power up. Last edited by check12; 06-18-2022 at 05:29 AM.. |
![]() |
![]() |
![]() |
#16 |
Badcaps Veteran
Join Date: Dec 2013
City & State: San Antonio
My Country: United States
Line Voltage: 120v 60hz / 240v 60hz
I'm a: Hardcore Geek
Posts: 606
|
![]() Peavey is a great company when it comes to providing schematics, etc. They will also sell parts if they have them, and they have had some parts to some very old amps I have repaired.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|