Hello,
I got this Synology DS218Play. Wrong power supply was connected (19V instead of 12), Synology is working booting, HDD1 is ok but HDD2 is not spining. Looking at SATA connector, there's no 5 V for HDD2.
I've measure THe PIN on SATA connector and I get between 0,4 to 1.35 V... it depends when I measure. I can find same voltage on PIN 7&8 of Mosfet 4953A.
https://datasheetspdf.com/pdf/104652...ductor/4953A/1
I could make jump from working 5V from HDD1 ? Or try to fix 5V on HDD2. i can't find any boardview or schematic
Thanks
Sam
I got this Synology DS218Play. Wrong power supply was connected (19V instead of 12), Synology is working booting, HDD1 is ok but HDD2 is not spining. Looking at SATA connector, there's no 5 V for HDD2.
I've measure THe PIN on SATA connector and I get between 0,4 to 1.35 V... it depends when I measure. I can find same voltage on PIN 7&8 of Mosfet 4953A.
https://datasheetspdf.com/pdf/104652...ductor/4953A/1
I could make jump from working 5V from HDD1 ? Or try to fix 5V on HDD2. i can't find any boardview or schematic
Thanks
Sam
Comment