I have a UN60FH6003FXZA that due to a bad solder joint, blew the fuse on the power supply board. I replaced the fuse last night but had no power indicator and the tv won't power up. I unplugged the main board and the backlights come on. When the fuse blew on the power supply I audibly heard the pop and the fuse was blackened inside. I'm assuming that a spike went to the main board. My question is, can I track down some sort of transistor or smd that would've taken the jolt and can be replaced? The board is not in stock on SJ and it's rather scarce and expensive on eBay.
Here is a link to the board on SJ with some good pictures of it.
https://www.shopjimmy.com/samsung-bn...6003fxza-hh01/
Can I fix it, and if so, where should I start looking?
Thanks
Here is a link to the board on SJ with some good pictures of it.
https://www.shopjimmy.com/samsung-bn...6003fxza-hh01/
Can I fix it, and if so, where should I start looking?
Thanks
Comment